47 - 63HZ Meanwell LED Driver 320W 48V Single Output Constant Voltage HLG-320H manufacturer from China Shenzhen City Optoelectronic Technology Co.,Ltd

47 - 63HZ Meanwell LED Driver 320W 48V Single Output Constant Voltage

Place of Origin:

Taiwan, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: HLG-320H

MEANWELL 240W 54V LED Power Supply UL/cUL PFC IP65 HLG-240

Specific

MEANWELL 240W 54V LED Power Supply UL/cUL PFC IP65 HLG-240

Specification:

MODEL		HLG-320H-48
OUTPUT	DC VOLTAGE	48V
	CONSTANT CURRENT REGION Note.4	24 ~ 48V
	RATED CURRENT	6.7A
	RATED POWER	321.6W
	RIPPLE & NOISE (max.) Note.2	250mVp-p
	VOLTAGE ADJ. RANGE Note.6	43 ~ 52V
	CURRENT ADJ. RANGE	Can be adjusted by internal potential meter or through output cable
	CURRENT ADJ. RANGE	3.35 ~ 6.7A
	VOLTAGE TOLERANCE Note.3	±1.0%
	LINE REGULATION	±0.5%
	LOAD REGULATION	±0.5%
	SETUP, RISE TIME Note.8	2500ms, 80ms at full load 230VAC /115VAC
	HOLD UP TIME (Typ.)	15ms at full load 230VAC /115VAC
INPUT	VOLTAGE RANGE Note.5	90 ~ 305VAC 127 ~ 431VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR	PF 0.95/230VAC PF 0.98/115VAC at full load and rated output voltage PF 0.9 at 50 ~ 100% load
	EFFICIENCY (Typ.)	95%
	AC CURRENT	4A / 115VAC 2A / 230VAC 1.8A / 277VAC
	INRUSH CURRENT(Typ.)	COLD START 75A/230VAC
	LEAKAGE CURRENT	<0.75mA / 277VAC
PROTECTION	OVER CURRENT Note.4	95 ~ 108%
	OVER CURRENT Note.4	Protection type : Constant current limiting, recovers automatically after fault condition is removed
	SHORT CIRCUIT	Hiccup mode, recovers automatically after fault condition is removed.
	OVER VOLTAGE	53.5 ~ 60V
	OVER VOLTAGE	Protection type : Shut down and latch off o/p voltage, re-power on to recover
	105°C ±5 °C(TSW1)
	OVER TEMPERATURE	Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-30 ~ +60°C @ full load ; +70°C @ 60% load (Refer to derating curve) ; -40 can power on
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80°C , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 ~ 50°C )
	VIBRATION	10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS Note.7	UL8750, EN61347-1, EN61347-2-13 independent (except for HLG-320H C type) approved ; Design refer to UL60950-1, TUV EN60950-1
	WITHSTAND VOLTAGE	I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
	EMI CONDUCTION & RADIATION	Compliance to EN55015, EN55022 (CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2 Class C ( 50% load) ; EN61000-3-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, heavy industry level (surge 4KV), criteria A
OTHERS	MTBF	Khrs min. MIL-HDBK-217F (25°C )
	DIMENSION	2529042mm (LWH)(HLG-320H-Blank/A/B) 2569042mm (LWH)(HLG-320H-C)
	PACKING	1.88Kg;8pcs/16kg/0.83 CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Type A and type C only. 7. Safety and EMC design refer to EN60598-1, subject CNS15233, GB7000.1, FCC part18. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.